|
Posted by Ignoramus15099 on January 17, 2010, 10:47 pm
Please log in for more thread options
I have never seen a connector like this... Any idea?
http://igor.chudov.com/misc/ebay/tmp/tmp-6161.jpg
|
|
Posted by Ned Simmons on January 17, 2010, 11:34 pm
Please log in for more thread options
On Sun, 17 Jan 2010 21:47:57 -0600, Ignoramus15099
>I have never seen a connector like this... Any idea?
>
>http://igor.chudov.com/misc/ebay/tmp/tmp-6161.jpg
It looks like a face seal fitting. There's an o-ring in the face of
the mating fitting.
http://www.swagelok.com/search/find_products_home.aspx?SEARCH=/id-10000215/type-1
--
Ned Simmons
|
|
Posted by mattathayde on January 17, 2010, 11:41 pm
Please log in for more thread options
mattathayde had written this in response to
http://rittercnc.com/metalworking/What-regulator-is-this-220236-.htm :
-------------------------------------
Ignoramus15099 wrote:
> I have never seen a connector like this... Any idea?
> http://igor.chudov.com/misc/ebay/tmp/tmp-6161.jpg
looks like some one just put a blow off valve into an NPT fitting, that or
an
adapter of some sort. i would bet money that piece will come out and you
will
have a standard fitting
-matt
##-----------------------------------------------##
Delivered via
http://www.rittercnc.com/
Metalworking Forums
Web and RSS access to your
favorite newsgroup -
rec.crafts.metalworking,sci.engr.joining.welding -
messages and counting!
##-----------------------------------------------##
|
|
Posted by Charles U Farley on January 18, 2010, 2:19 am
Please log in for more thread options
> I have never seen a connector like this... Any idea?
>
> http://igor.chudov.com/misc/ebay/tmp/tmp-6161.jpg
Inlet side?
Have you ruled out CGA-320?
http://www.westernenterprises.com/enterprises/PDFS/wi21.pdf
|
|
Posted by Gunner Asch on January 18, 2010, 6:31 am
Please log in for more thread options
On Sun, 17 Jan 2010 21:47:57 -0600, Ignoramus15099
>I have never seen a connector like this... Any idea?
>
>http://igor.chudov.com/misc/ebay/tmp/tmp-6161.jpg
Nitrogen
Gunner
"I am for doing good to the poor, but I differ in opinion of the
means. I think the best way of doing good to the poor, is not
making them easy in poverty, but leading or driving them out of
it. In my youth I travelled much, and I observed in different
countries, that the more public provisions were made for the
poor the less they provided for themselves, and of course became
poorer. And, on the contrary, the less was done for them, the
more they did for themselves, and became richer." -- Benjamin
Franklin, /The Encouragement of Idleness/, 1766
|
| Similar Threads | Posted | | CNC air regulator? | July 12, 2010, 1:58 am |
| O2 regulator trouble | December 2, 2006, 6:40 pm |
| check voltage regulator | August 27, 2006, 12:48 pm |
| gas welding regulator problem,... | March 15, 2007, 11:54 pm |
| Decent low cost oxy/ace regulator set | May 15, 2006, 5:02 pm |
| CO2 regulator washer source? | April 12, 2008, 1:47 am |
| check alternator/regulator | March 24, 2009, 10:02 am |
| fa: really nice stainless matheson regulator | October 6, 2006, 1:00 pm |
| acetylene regulator parts/repair | March 23, 2007, 6:13 pm |
| Re: A little plating and anodizing current regulator | March 14, 2006, 12:41 am |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>
>http://igor.chudov.com/misc/ebay/tmp/tmp-6161.jpg