What vertical mill to buy.

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
What vertical mill to buy. Alex 09-23-2006
Posted by Alex on September 24, 2006, 2:10 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Alex on September 24, 2006, 2:37 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gunner on September 24, 2006, 3:17 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Alex on September 24, 2006, 3:21 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Karl Townsend on September 24, 2006, 8:18 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Which VFD for my vertical mill? November 8, 2007, 10:51 pm
Cinci Vertical Mill May 13, 2007, 8:56 pm
SERVO vertical mill July 30, 2007, 12:09 pm
Bridgeport Series 1 vertical mill August 1, 2007, 4:10 pm
FS Bargain vertical mill in Southern California December 12, 2006, 3:15 am
Where are the knee locks on a Millrite MVI vertical mill? February 4, 2007, 1:28 pm
Ebay Kearney & Trecker Vertical Mill March 31, 2008, 3:02 pm
Backlash Adjustment Tool for SHARP vertical MILL November 26, 2006, 5:01 am
Vertical mill horizontal travel limiter stop? December 30, 2006, 4:25 pm
Extending the lead-screw of my small vertical mill February 6, 2007, 2:14 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap