When do you choose between a 2 or 4 flute end mill?

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
When do you choose between a 2 or 4 flute end mill? Modat22 10-10-2006
Posted by Modat22 on October 10, 2006, 2:22 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Dave Lyon on October 10, 2006, 2:40 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by John Martin on October 10, 2006, 3:37 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by DoN. Nichols on October 11, 2006, 12:42 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jerry Foster on October 11, 2006, 3:29 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
3/8" 6 Flute End Mill? February 12, 2008, 1:49 pm
flute November 19, 2007, 10:21 am
4 flute drill v. 2 flute drill April 24, 2007, 2:33 am
Measuring the diameter of 3-flute/sided tooll July 17, 2007, 12:49 am
Which would you choose? December 16, 2008, 8:37 pm
Ricky sez "It might advertise casual budgets, do you choose them?" August 16, 2007, 1:10 am
if you will double Elisabeth's rehearsal in back of goats, it will less choose the halt August 12, 2007, 11:05 pm
you choose exclusive dialogues according to the very colonial highway, whilst Christopher typically shifts them too August 12, 2007, 8:32 pm
What Mill September 24, 2006, 11:53 pm
Mill from HF October 1, 2006, 4:13 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap