Where can I buy about 100 ball bearings?

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Where can I buy about 100 ball bearings? matthewshepherd 07-24-2006
Posted by Trevor Jones on July 27, 2006, 6:14 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gunner on July 28, 2006, 1:23 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Trevor Jones on July 28, 2006, 9:08 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on July 27, 2006, 4:31 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Pete on July 26, 2006, 12:24 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
I bought 400 ball bearings , but buy Fastenal , not VXB November 29, 2006, 10:58 am
making custom ball bearings...? March 16, 2006, 3:36 am
Source for loose 3mm ball bearings needed March 20, 2008, 10:35 pm
Bursting speed of flywheels (and overspun ball bearings) April 17, 2006, 10:05 pm
Kaydon Bearings Ulta slim bearings - cost is prohibitive -Alternative supplier?? October 25, 2007, 5:24 pm
1/4" ball on 1/8" rod April 10, 2006, 12:29 pm
Ball bearing fit... July 27, 2006, 10:28 am
1.125" Ball Stud December 1, 2007, 2:59 pm
Cutting Ball Screws? November 30, 2006, 8:48 am
Ball end mill not round January 31, 2007, 1:53 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap