Who needed the knee hndle for K&T#2? I got one

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Who needed the knee hndle for K&T#2? I got one Gunner 03-24-2007
Posted by Gunner on March 24, 2007, 10:04 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Brian Lawson on March 24, 2007, 11:12 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gunner on March 24, 2007, 4:45 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gunner on March 24, 2007, 4:44 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Rex on March 26, 2007, 1:58 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Re: Knee Mill Drawings Needed March 28, 2007, 1:30 am
FS: ProtoTrak Knee Mill July 24, 2006, 10:24 pm
Broken knee gib on BP resurrected January 2, 2007, 1:04 am
Another broken Bridgeport knee gib! January 2, 2007, 8:04 am
WTD: knee mill 40 taper March 4, 2007, 8:06 am
RF 45 or Chinese Knee Mill September 23, 2007, 3:17 pm
Stuck bridgeport knee May 7, 2006, 3:25 pm
Bridgeport power knee lift April 18, 2007, 7:48 pm
Where are the knee locks on a Millrite MVI vertical mill? February 4, 2007, 1:28 pm
Flood coolant guard for knee mill June 11, 2008, 3:10 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap