Who needed the power assist downfeed drill press?

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Who needed the power assist downfeed drill press? Gunner 07-30-2006
Posted by Gunner on July 30, 2006, 6:44 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Larry Jaques on August 6, 2006, 12:41 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gunner on August 6, 2006, 3:21 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
info needed on Victoria drill press March 4, 2007, 9:45 pm
Parts Needed for old Delta/Rockwell Drill Press 15-655 September 29, 2006, 12:23 pm
Powermatic 1150 drill press, opinion needed ASAP February 27, 2007, 12:09 pm
Continuously-Variable Speed Drill Press - Recommendation Needed (no belt-changing pulleys!) October 18, 2006, 2:53 pm
PICTURES -- Hydraulic assist for the arbor press March 8, 2008, 5:48 pm
How can I automatically tap 500 holes in 5/16-18 thread size using a hand drill or drill press? January 1, 2008, 6:18 pm
saw downfeed? February 26, 2007, 9:20 pm
Burgmaster 0B-Wobbly downfeed problem November 9, 2007, 12:09 am
Drill Rob for Drill Press Runout July 4, 2006, 1:04 pm
MT2 drill bits vs. MT2 drill press August 30, 2006, 2:33 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap