Wire EDM expert

Home| Search | About

User Password

Lost Password?

General Metalworking - All aspects of working with metal.

Bookmark this page: YahooMyWeb

Yahoo!

Google

Windows Live

del.icio.us digg

digg

Netscape

Subject

Author

Date

11-18-2006

Posted by Karl Townsend on November 18, 2006, 9:03 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Posted by Ed Huntress on November 18, 2006, 10:57 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Karl Townsend on November 19, 2006, 10:11 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Ed Huntress on November 19, 2006, 10:25 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Ed Huntress on November 19, 2006, 10:27 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Similar Threads	Posted
Re: Need an expert...	December 22, 2007, 9:05 pm
Re: Need an expert...	December 22, 2007, 10:38 pm
Re: Need an expert...	December 23, 2007, 4:36 am
master link expert	August 12, 2007, 12:38 pm
$200 For Expert Electroplater Advice	June 26, 2008, 5:14 pm
OT: Fiberglass expert hekp needed	June 26, 2007, 9:47 pm
Wanted: Plastic casting expert	October 23, 2007, 9:16 pm
$200 For Short Phone Interview Of Metal Plating Expert	April 8, 2007, 8:56 pm
if you'll express Elmo's darkness with temples, it'll dully engage the expert	August 12, 2007, 10:05 pm
Introducing The Hz2.1 Portable Hot Stamp Wire Marker to Meet Industry's Need for Flexible, Cost-effective Wire Marking	April 30, 2007, 4:13 pm

XML Sitemap