bond UHMW to SS

Home| Search | About

User Password

Lost Password?

General Metalworking - All aspects of working with metal.

Bookmark this page: YahooMyWeb

Yahoo!

Google

Windows Live

del.icio.us digg

digg

Netscape

Subject

Author

Date

09-05-2007

Posted by Karl Townsend on September 5, 2007, 9:59 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Posted by Pete C. on September 5, 2007, 10:02 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Larry Jaques on September 5, 2007, 10:22 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Tom Gardner on September 6, 2007, 1:49 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Larry Jaques on September 6, 2007, 8:30 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Similar Threads	Posted
Bond. James Bond.	March 19, 2008, 10:57 pm
bond AL	April 11, 2007, 8:55 pm
How to bond vulcanized rubber to PVC?	December 27, 2006, 3:27 pm
bond foam rubber	August 27, 2008, 9:54 pm
Re: machine wedge in UHMW	October 30, 2007, 3:59 pm
Re: machine wedge in UHMW	October 30, 2007, 4:24 pm
Re: machine wedge in UHMW	October 30, 2007, 4:41 pm
Re: machine wedge in UHMW	October 30, 2007, 6:57 pm
Re: machine wedge in UHMW	November 2, 2007, 1:17 am
OT HDPE/UHMW polyethylene?	March 18, 2008, 12:38 am

XML Sitemap