cutting a keyway in a hardened & ground shaft

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
cutting a keyway in a hardened & ground shaft Tove Momerathsson 07-24-2006
Posted by Tove Momerathsson on July 24, 2006, 10:20 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Robin S. on July 24, 2006, 10:54 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gunner on July 24, 2006, 11:46 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by c.henry on July 25, 2006, 6:55 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Tove Momerathsson on July 25, 2006, 2:41 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
hardened gear on a mild shaft September 28, 2008, 12:52 am
Cutting internal Keyway November 28, 2006, 7:42 am
Cutting hardened Gears April 29, 2007, 1:48 am
keyway question September 22, 2006, 3:53 am
Need a step pulley with a 7/8" bore with keyway October 20, 2006, 2:10 pm
Hardened lock shackles? April 29, 2007, 12:04 am
Turning 4140 Pre Hardened June 23, 2007, 10:46 am
Soaped, hardened parts have less scale. Why? November 5, 2006, 12:28 am
"Unhardening" hardened punches to deform them May 14, 2007, 8:42 am
Re: Drilling hardened carbon steel set screw? July 12, 2006, 4:17 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap