cutting inside teeth

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
cutting inside teeth vmpolesov 09-24-2006
Posted by on September 24, 2006, 1:34 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on September 24, 2006, 2:45 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gunner on September 24, 2006, 3:22 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by David Billington on September 24, 2006, 8:01 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by D Murphy on September 24, 2006, 12:29 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Re: Saw Blade Teeth - Cold Saw Cutting Thin Wall Tubing May 16, 2006, 7:35 pm
Re: Saw Blade Teeth - Cold Saw Cutting Thin Wall Tubing May 16, 2006, 7:41 pm
fixing small backhoe bucket teeth? July 29, 2007, 10:02 pm
we file the gigantic inside August 12, 2007, 11:05 pm
Securing inside a tube March 17, 2006, 4:22 am
HF: ITC -- Inside Track Club -- $9.99 October 2, 2008, 4:53 pm
What is the powder inside power leads ? January 5, 2007, 9:46 pm
they are rejecting inside the sentence now, won't free pps later August 12, 2007, 5:01 pm
[OT] War Inside the Wire -- You can handle the truth about Guantanamo Bay September 16, 2006, 9:31 am
Adjusting a Lufkin 680A Inside Micrometer December 29, 2006, 12:10 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap