drill bits

Home| Search | About

User Password

Lost Password?

General Metalworking - All aspects of working with metal.

Bookmark this page: YahooMyWeb

Yahoo!

Google

Windows Live

del.icio.us digg

digg

Netscape

Subject

Author

Date

09-09-2007

Posted by thirst4knwldg on September 9, 2007, 9:50 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Posted by spaco on September 10, 2007, 10:07 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Similar Threads	Posted
Bad Drill Bits!!! If you don't have a Darex Drill Doctor, read at your own risk of failing to understand.	December 12, 2007, 4:16 pm
MT2 drill bits vs. MT2 drill press	August 30, 2006, 2:33 am
More on drill bits over 5/8"	September 17, 2006, 7:36 pm
drill bits	September 9, 2007, 9:51 pm
Re: jetting drill bits?	September 5, 2006, 7:56 pm
Grizzly drill bits	February 23, 2007, 10:09 am
Enco drill bits	December 11, 2007, 3:37 pm
Naming drill bits (HSS, HSS-E, HSS G, ...)	March 14, 2006, 4:42 pm
1/8" or smaller drill bits	May 4, 2008, 11:09 am
Question to HSMers -- have you used drill bits above 5/8"	September 16, 2006, 1:23 am

XML Sitemap