extruding brass

Home| Search | About

User Password

Lost Password?

General Metalworking - All aspects of working with metal.

Bookmark this page: YahooMyWeb

Yahoo!

Google

Windows Live

del.icio.us digg

digg

Netscape

Subject

Author

Date

09-05-2006

Posted by on September 5, 2006, 8:57 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Posted by Lloyd E. Sponenburgh on September 5, 2006, 9:08 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by on September 5, 2006, 2:14 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Ries on September 5, 2006, 10:38 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Similar Threads	Posted
Why use brass?	May 14, 2006, 1:32 am
brass	June 15, 2008, 4:55 pm
Best way to bevel brass	July 13, 2006, 4:36 pm
brass rods	July 23, 2006, 1:25 am
Brass brazing	January 2, 2007, 8:05 am
Knurling brass	July 21, 2007, 5:13 pm
brass boring	July 30, 2007, 10:55 pm
3-48 Brass Standoff...	November 19, 2007, 3:41 pm
Re: FS- Brass wire	April 24, 2006, 8:58 pm
Patina on brass	January 19, 2008, 11:25 am

XML Sitemap