|
Posted by William Noble on July 1, 2008, 2:24 am
Please log in for more thread options
Here is a vacuum pump that I'm not going to fix - needs a new motor stator
(in fact right now the stator is not even there) - but it's an expensive
pump for someone who would like to tackle a project - either install a
stator from another motor, or do some machining and make the armature into a
pulley and drive with a separate motor, or ?? - whatever you do it would be
a project - here's the link if you are interested (actually, the link is the
same whether you are interested or not, just whether you follow it might be
the variable).
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300238178066
--
Bill
www.wbnoble.com
** Posted from http://www.teranews.com **
|
|
Posted by William Noble on July 13, 2008, 1:18 pm
Please log in for more thread options
I think these items may interest the crowd here:
1. a new, in box Dayton 3 belt 7 inch sheave - cast iron, the real thing not
a pot metal piece of junk
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300241642245
2. I have a huge pile of wooden boat magazines - a few are listed on ebay,
but I have most issues from 20 to 200 - these are from an estate, if you
want any, let me know what ones you want and you can get them before I put
the lot on ebay - issues 19 and below are on ebay now, here's one link:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=300241497335
** Posted from http://www.teranews.com **
|
| Similar Threads | Posted | | Vacuum pump gave up!! | June 9, 2007, 10:52 am |
| Vacuum pump question | March 6, 2008, 11:19 pm |
| Re: Vacuum pump question | March 10, 2008, 1:22 am |
| FA - nice 3 phase 220/440 vacuum pump | April 29, 2006, 6:32 pm |
| Vacuum pump advice please, for casting, investing, etc. | April 16, 2006, 7:30 pm |
| Semi-OT Diesel Pusher, Electric Vacuum Pump, question | January 20, 2007, 7:47 pm |
| Re: OT - use of a pneumatic vacuum pump (auto A/C use), converting R12 manifold gages to R134A? | April 25, 2008, 2:27 am |
| FA: hydraulic pump, right angle gear drive, very heavy caster, Oil pump from large milling machine | April 26, 2006, 1:29 am |
| When to run oiler pump during CNC cycle? Bed lift due to oiler pump. | October 27, 2006, 3:34 pm |
| Dusty wet / dry vacuum | November 25, 2006, 7:10 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap