flattening a bolt

General Metalworking - All aspects of working with metal. 

Bookmark this page:   Yahoo!   Google   Windows Live   del.icio.us   digg   Netscape

Subject Author Date flattening a bolt eag111 07-10-2006
Posted by on July 10, 2006, 1:10 pm Please log in for more thread options >I will give that a try if I can't find the ammonium version. I have some >pipe flux with zinc chloride but it is only 8%. > > -- > Glenn Ashmore Don't forget, you can make your own (much stronger) by killing some hydrochloric acid with a handful of zinc. (I presume you have zinc lying around if you're galvanising stuff.) Otherwise use scrap galvanised steel. Cheers -- Jeff R. Similar Threads Posted flattening a bolt July 10, 2006, 1:10 pm OT: (a little) Flattening a griddle March 20, 2006, 10:16 am Flattening a pvc pipe April 8, 2008, 6:54 pm Flattening silver wire September 21, 2007, 12:35 am Re: Flattening 1/4" Steel Plate? March 7, 2006, 9:47 pm Report back on: "Flattening 1/4" Steel Plate?" April 16, 2006, 5:03 pm 9/16 X 18 tpi bolt? September 7, 2007, 11:23 pm 9" SB bolt pattern August 6, 2006, 11:32 am OT how to remove Rem 700 bolt November 19, 2006, 7:13 pm OT: Bolt Question March 26, 2006, 11:44 am