how to build a manual rotator

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
how to build a manual rotator Shaun Van Poecke 02-26-2007
Posted by Shaun Van Poecke on February 26, 2007, 5:59 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by JP Sipponen on February 27, 2007, 6:54 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Shaun Van Poecke on February 28, 2007, 6:26 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by JP Sipponen on March 9, 2007, 5:53 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gunner on March 9, 2007, 11:19 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Re: Manual from Hell June 29, 2006, 3:33 pm
Re: Manual from Hell June 29, 2006, 4:47 pm
Lathe Manual October 9, 2006, 12:34 pm
Looking for Gorton operators manual July 24, 2006, 12:03 pm
Kellogg American manual WTD August 16, 2006, 11:39 pm
Re: Looking for Mitutoyo GML-3705W Manual. August 27, 2006, 8:47 am
will BP series II manual mill run on 208 3p? August 28, 2006, 7:23 pm
RFI - Manual or tech info for DRC 600 DRO September 26, 2006, 6:26 pm
Anyone need a pallet jack (manual), WI? April 5, 2007, 10:41 pm
Vergeltungswaffe 1 Operations Manual September 18, 2007, 10:10 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap