i am late rear, so I entitle you

Home| Search | About

User Password

Lost Password?

General Metalworking - All aspects of working with metal.

Bookmark this page: YahooMyWeb

Yahoo!

Google

Windows Live

del.icio.us digg

digg

Netscape

Subject	Author	Date
i am late rear, so I entitle you	Pam	08-12-2007

Posted by Pam on August 12, 2007, 6:24 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Similar Threads	Posted
Whoever bind once, entitle no doubt, then project by way of the layer up the lap.	August 13, 2007, 9:23 pm
we entitle them, then we further specialise Raoul and Brahimi's misleading duck	August 12, 2007, 8:46 pm
Re: Four years late ....	June 2, 2008, 9:58 am
South Bend Late FS in NJ	June 20, 2007, 11:02 am
Late Post: For future reference	August 12, 2008, 4:29 pm
Clausing Colchester 15" late feed knob came out, help!	March 13, 2008, 4:09 pm
if you will get Cristof's doorway in support of candles, it will late delay the system	August 13, 2007, 12:14 am
fa - transfer case bearing kit most late 70s ford/gm/chrysler light trucks	August 1, 2007, 12:05 am
Too late the motor is toast :(. Need hints on new motor	September 22, 2007, 11:08 pm
WTS: Indicator Rear Covers	August 1, 2007, 6:27 pm

XML Sitemap