keeping sheet metal roll rolls from rusting?

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
keeping sheet metal roll rolls from rusting? Grant Erwin 12-08-2007
Posted by Grant Erwin on December 8, 2007, 2:05 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Anthony on December 8, 2007, 3:23 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Mark Harriss on December 9, 2007, 5:03 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Rolls Royce mini lathe May 27, 2008, 8:56 am
3 in 1 Sheet Metal Help! March 18, 2007, 10:55 pm
sheet metal forming August 5, 2006, 4:42 pm
STAMPING SHEET METAL April 6, 2007, 2:53 am
Welding Sheet Metal May 28, 2007, 1:55 am
How to relax sheet metal? March 8, 2006, 2:08 am
2-1/4" hole saw and galv. sheet metal March 15, 2007, 8:04 am
Driving a SHEET METAL screw... How to? May 21, 2007, 3:44 am
sheet metal forming pressures September 16, 2007, 11:35 pm
Re: Sheet Metal Bead Rolling? April 27, 2006, 9:37 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap