keyway question

Home| Search | About

User Password

Lost Password?

General Metalworking - All aspects of working with metal.

Bookmark this page: YahooMyWeb

Yahoo!

Google

Windows Live

del.icio.us digg

digg

Netscape

Subject

Author

Date

09-22-2006

Posted by on September 22, 2006, 3:53 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Posted by =?ISO-8859-1?Q?Nick_M=FCller?= on September 22, 2006, 4:26 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Anthony on September 22, 2006, 5:21 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Gunner on September 22, 2006, 7:26 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Gunner on September 22, 2006, 7:24 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Similar Threads	Posted
Cutting internal Keyway	November 28, 2006, 7:42 am
Need a step pulley with a 7/8" bore with keyway	October 20, 2006, 2:10 pm
cutting a keyway in a hardened & ground shaft	July 24, 2006, 10:20 pm
OT: Another GPS question	November 27, 2006, 1:08 pm
OT Car Question.	December 5, 2006, 3:53 pm
Another VFD question	February 7, 2007, 7:31 pm
VFD question	April 16, 2007, 10:37 pm
50 hz VS 60 hz and a 120 HZ question	October 30, 2007, 10:01 am
lathe question	July 23, 2006, 5:59 pm
OT - Math question for BB	July 26, 2006, 2:30 am

XML Sitemap