liquid wrench be ok as a cutting or tapping fluid ?

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
liquid wrench be ok as a cutting or tapping fluid ? pogo 08-11-2007
Posted by pogo on August 11, 2007, 7:32 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gerry on August 11, 2007, 7:40 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Richard J Kinch on August 11, 2007, 11:57 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by pogo on August 12, 2007, 12:53 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Joe Pfeiffer on August 12, 2007, 1:20 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Using oil emulsion cutting fluid for hand tapping January 17, 2008, 12:16 am
Cutting fluid March 17, 2007, 1:48 pm
old - really old - cutting fluid? May 3, 2007, 7:32 pm
Cutting fluid? April 30, 2008, 2:01 pm
Used motor oil as cutting fluid August 3, 2008, 4:25 pm
Alcohol as cutting fluid? August 4, 2008, 5:12 pm
Pretty good cutting fluid for aluminum June 26, 2007, 2:37 pm
What mcmaster item for cutting fluid (lathe+steel) August 3, 2008, 11:29 pm
Re: Tapping aluminum (or tapping on wood?) December 15, 2007, 9:13 pm
Re: Tapping aluminum (or tapping on wood?) December 15, 2007, 10:35 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap