making small involute spur gears with a CNC mill/lathe + gear hob?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
making small involute spur gears with a CNC mill/lathe + gear hob? tj 01-29-2007
Posted by tj on January 29, 2007, 5:35 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Ron Thompson on January 29, 2007, 6:35 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Trevor Jones on January 29, 2007, 7:38 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on January 29, 2007, 9:49 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Robert Swinney on January 30, 2007, 10:06 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
cutting small involute spur gears January 26, 2007, 4:23 pm
Cutting Involute Gears May 2, 2008, 3:07 pm
Browning spur gears & collars November 19, 2008, 11:31 am
Machining a spur gear October 1, 2007, 12:58 am
wanted - big 'ol' spur gear, about ten to 12" diameter range. just anything... November 5, 2006, 4:03 pm
Books: Threading & Making Gears On A Lathe April 6, 2006, 8:18 pm
FF - small gear motor August 7, 2007, 12:17 pm
Small gear supplier December 22, 2007, 11:52 pm
small differential gear source? October 20, 2007, 6:21 pm
Gear rack sources for small quantities? April 24, 2006, 9:39 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap