metric thread on inch type lathe

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
metric thread on inch type lathe jb 04-23-2007
Posted by jb on April 23, 2007, 10:17 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Don Young on April 24, 2007, 10:08 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Imperial thread on metric lathe! November 10, 2006, 2:42 pm
fa - nice metric? facemill - 4 inch diameter May 19, 2008, 12:26 am
how much force can be applied with a 1 inch fine thread bolt March 27, 2007, 8:53 pm
Buying thread cutting taps dies and best type of tool steel to use???? February 20, 2008, 4:29 pm
Metric thread size??? June 5, 2007, 7:41 pm
Left hand Metric thread January 2, 2007, 9:13 pm
Lathe chuick on one inch shaft April 10, 2007, 10:08 pm
Craftsman 6 Inch Lathe: Need Advice May 13, 2006, 7:53 pm
Reed Prentice 20 inch lathe wanted for parts July 30, 2006, 12:28 am
Rockwell-Delta 10 inch lathe spindle taper? May 4, 2006, 8:55 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap