milling a pocket in Al

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
milling a pocket in Al Wayne 11-27-2007
Posted by Wayne on November 27, 2007, 4:07 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jim Stewart on November 27, 2007, 4:32 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Randy Replogle on November 27, 2007, 4:40 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Pete C. on November 27, 2007, 4:47 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by BillM on November 27, 2007, 4:50 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Pocket 25 Plasma Cutter November 10, 2007, 6:06 pm
Starrett Pocket Charts February 13, 2008, 6:23 pm
Slightly OT ! where to find a good pocket protector? July 13, 2006, 11:09 pm
Carbide insert screw pocket seat angle. July 9, 2006, 1:32 am
Ping Karl Townsend - need a Pocket Apple Variety Refetrence List September 2, 2008, 11:23 pm
UPDATE AND THANKS Milling on the lathe Vertical tslot table or vertical milling vise? April 1, 2006, 1:55 pm
What is this milling table, what does it do? July 14, 2006, 6:25 am
Need help with milling setup December 9, 2006, 2:57 am
Help with milling tools ID please January 5, 2007, 6:04 pm
Milling projects June 13, 2007, 2:10 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap