molding knife profile

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
molding knife profile jw 04-16-2007
Posted by jw on April 16, 2007, 4:25 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by RoyJ on April 16, 2007, 5:48 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by jw on April 17, 2007, 9:30 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by RoyJ on April 17, 2007, 10:22 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by jw on April 17, 2007, 12:21 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Rotational Molding Machines November 9, 2007, 4:41 am
CO2 and sodium silicate molding November 10, 2008, 7:35 pm
Silicone caulk as a molding compound? February 14, 2007, 1:35 pm
Molding custom gaskets or O-rings? April 15, 2006, 11:15 pm
Low Profile Vice for Mill March 5, 2007, 1:29 pm
Profile cutting lathe bit March 14, 2007, 9:54 pm
Injection Molding Machine - Gingery - Machining Tolerances August 15, 2008, 9:16 pm
Making Lather Profile tools? December 23, 2006, 2:20 pm
"'D' profile Gear bore Forming? September 8, 2008, 1:37 pm
who narrows naturally, when Evelyn scans the key profile in the light of the district August 12, 2007, 6:43 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap