|
Posted by Randy on July 25, 2008, 8:50 am
Please log in for more thread options On Thu, 24 Jul 2008 10:01:36 -0500, Don Foreman
>On Thu, 24 Jul 2008 07:09:00 -0500, rbraun333@enter.net wrote:
>
>>On Wed, 23 Jul 2008 21:46:07 -0400, "Michael A. Terrell"
>>
>>>
>>>rbraun333@enter.net wrote:
>>>>
>>>> The pot went bad on my Miller finger tip control. And I'm cheap.
>>>> $107.00 for the replcement pot with circuit board from Miller. Similar
>>>> pots at Newark are under $1.00 However I can't seem to find the
>>>> correct size and resistance value with a switch. The t18 series from
>>>> Piher seem perfect but I can't find anyone that carries them.
>>>>
>>>> http://www.piher-nacesa.com/pdf/23-T18v03.pdf
>>>>
>>>> anyone know where I could get these? or a similar one. Needs to be
>>>> 1000 ohms (1k) I'm sure I could make either lead style work.
>>>
>>>
>>>Those were used in transistor radios as volume controls.
>>>
>>>http://www.mouser.com/catalog/634/2233.pdf
>>
>>The Alpha's have an audio taper, would not work well for this
>>application. The Xicon's do not come in 1K. Close but no cigar. My
>>cousin has a handfull of 10K pots from his father's collection of
>>parts when he used to fix radios and other electronics.
>>
>>Remove 333 to reply via email
>
>http://search.digikey.com/scripts/DkSearch/dksus.dll?KeywordSearch
I can't find any with a switch at digikey. All the 1k's are .350"
dia, and the 16mm ones do not come in 1k.
Thank You,
Randy
Remove 333 from email address to reply.
|
> The pot went bad on my Miller finger tip control. And I'm cheap.
> $107.00 for the replcement pot with circuit board from Miller. Similar
> pots at Newark are under $1.00 However I can't seem to find the
> correct size and resistance value with a switch. The t18 series from
> Piher seem perfect but I can't find anyone that carries them.
>
> http://www.piher-nacesa.com/pdf/23-T18v03.pdf
>
> anyone know where I could get these? or a similar one. Needs to be
> 1000 ohms (1k) I'm sure I could make either lead style work.