need piece of 3/4" type K

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
need piece of 3/4" type K xkbal@hotmail.com 10-04-2006
Posted by xkbal@hotmail.com on October 4, 2006, 1:41 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Bob Meyer on October 4, 2006, 3:25 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Grant Erwin on October 4, 2006, 4:10 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by xkbal@hotmail.com on October 4, 2006, 4:15 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Ignoramus32140 on October 4, 2006, 4:23 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
FS Older Harris type 13 brazing tips (1&2) and cutting torch end piece October 30, 2006, 8:32 am
OT - New One piece Bearings versus two piece style March 26, 2006, 7:35 pm
OT: what is this piece of aluminum called? June 29, 2007, 1:25 am
Need to cut 4 flats on piece of aluminum November 16, 2007, 7:06 pm
I want to buy a solid piece of pure tungsten, 3 to 15 lbs. October 19, 2007, 2:37 pm
Knight chess-piece "plan"? November 14, 2007, 12:18 pm
ID a piece of Pretec Electronic Gauging Equipment? January 13, 2007, 2:38 pm
Do you want to get a piece of your Verizon/ Cingular Cellphone Bill paid back ... July 11, 2007, 2:31 pm
What type of hammer is that ? June 30, 2007, 4:05 pm
What switch type? March 14, 2006, 7:31 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap