old - really old - cutting fluid?

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
old - really old - cutting fluid? Grant Erwin 05-03-2007
Posted by Stupendous Man on May 4, 2007, 11:46 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on May 4, 2007, 5:01 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Dave August on May 7, 2007, 8:08 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Cutting fluid March 17, 2007, 1:48 pm
Cutting fluid? April 30, 2008, 2:01 pm
Used motor oil as cutting fluid August 3, 2008, 4:25 pm
Alcohol as cutting fluid? August 4, 2008, 5:12 pm
Pretty good cutting fluid for aluminum June 26, 2007, 2:37 pm
liquid wrench be ok as a cutting or tapping fluid ? August 11, 2007, 7:32 pm
Using oil emulsion cutting fluid for hand tapping January 17, 2008, 12:16 am
What mcmaster item for cutting fluid (lathe+steel) August 3, 2008, 11:29 pm
Forklift steering fluid ? July 9, 2006, 12:30 pm
Fluid for ultrasonic cleaner October 1, 2006, 1:32 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap