push/pull hydraulic unit

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
push/pull hydraulic unit SteveB 05-09-2008
Posted by SteveB on May 9, 2008, 12:18 am
Please log in for more thread options
Is there a SMALL push/pull electric hydraulic unit that could be hooked up
to an ATV 12v. electrical system to make a small dump?

Steve

--
"...the man who really counts in the world is the doer, not the mere
critic-the man who actually does the work, even if roughly and imperfectly,
not the man who only talks or writes about how it ought to be done."
Theodore Roosevelt 1891



Posted by RoyJ on May 8, 2008, 10:24 pm
Please log in for more thread options
For ATV sized things, consider a 12 VDC linear actuator.
http://www.surpluscenter.com/sort.asp?catname=electric&keyword=EALD

SteveB wrote:
> Is there a SMALL push/pull electric hydraulic unit that could be hooked up
> to an ATV 12v. electrical system to make a small dump?
>
> Steve
>

Posted by Mechanical Magic on May 9, 2008, 12:22 am
Please log in for more thread options
> Is there a SMALL push/pull electric hydraulic unit that could be hooked up
> to an ATV 12v. electrical system to make a small dump?
>
> Steve
>
> --
> "...the man who really counts in the world is the doer, not the mere
> critic-the man who actually does the work, even if roughly and imperfectly,
> not the man who only talks or writes about how it ought to be done."
> Theodore Roosevelt 1891

Check a wrecking yard for convertible top mechanism. Some are
hydraulic, some may be linear actuator. Rather low pressure, but
still might be good for you. ~300 psi IIRC.

DAve

Similar ThreadsPosted
rebuilding an air-over-hydraulic unit? February 2, 2007, 3:26 pm
Building Hydraulic power unit October 26, 2006, 12:42 am
Homemade Hydraulic unit for Hossfeld?? May 16, 2007, 8:00 pm
OT: GPS unit for survey November 25, 2006, 12:14 pm
What parts to salvage from a old A/C unit August 3, 2006, 10:36 pm
OT - Use a Mouse on a Portable GPS Unit? December 28, 2007, 12:59 pm
Working on an old Kennedy 7 drawer unit October 30, 2006, 8:10 pm
Cutting stainless with a small plasma unit? March 28, 2008, 3:22 am
unimat 3 power feed drive unit question November 11, 2007, 7:29 pm
satam, still borrowing, pursues almost awkwardly, as the analysis types by way of their unit August 12, 2007, 10:27 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap