quick and simple v-belt tensioning, the mechanism/ideas..."trick screws", and shortening springs?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
quick and simple v-belt tensioning, the mechanism/ideas..."trick screws", and shortening springs? dave 07-13-2006
Posted by dave on July 13, 2006, 10:28 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Don Foreman on July 13, 2006, 12:18 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by James Waldby on July 13, 2006, 12:40 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Grant Erwin on July 13, 2006, 1:31 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by dave on July 15, 2006, 2:53 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
SAW TENSIONING HANDBOOK February 25, 2007, 5:19 pm
Shortening length & girth of large HSS drill bits October 27, 2008, 4:48 am
Re: A Very Costly Supermarket Trick March 10, 2007, 8:09 pm
pipe drilling trick January 15, 2008, 6:30 pm
Rotary table trick needed. January 17, 2007, 10:24 pm
Most effective Dating Trick revealed! October 24, 2007, 4:11 am
Learned new trick with vinegar - peracetic acid August 1, 2007, 12:08 am
Re: taking long straight cuts with oxyacetylene (Is there a trick to it?) February 4, 2008, 9:46 pm
Re: taking long straight cuts with oxyacetylene (Is there a trick to it?) February 4, 2008, 9:51 pm
Re: taking long straight cuts with oxyacetylene (Is there a trick to it?) February 4, 2008, 8:09 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap