scroll saw on aluminum?

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
scroll saw on aluminum? dpdphoto 04-29-2007
Posted by DanG on May 1, 2007, 7:27 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Grant Erwin on April 29, 2007, 7:07 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by RoyJ on April 29, 2007, 8:03 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Hyes' Hubby on April 29, 2007, 9:19 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Don Foreman on April 30, 2007, 2:06 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Scroll Chuck lubricant May 20, 2008, 4:25 pm
any opinion on Metalcraft scroll benders? September 25, 2006, 2:59 pm
Ryobi SC-160 Scroll Saw Speed Control? June 11, 2007, 4:14 pm
anyone know any good books with lots of patterns for scroll work? November 21, 2006, 2:42 pm
Harborfreight Metal Bender / Scroll, Book or Video March 11, 2008, 12:04 am
FS: 1952 Reynolds Aluminum book: "Machining Aluminum Alloys" April 12, 2006, 6:33 pm
Cast aluminum with embeded 6061-T6 aluminum rods August 14, 2007, 5:49 pm
Joining aluminum to aluminum mesh February 5, 2008, 12:12 am
Difference between Aluminum 6061 and Aluminum 12 October 12, 2008, 9:13 am
Lubrication for aluminum against aluminum? February 15, 2007, 2:06 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap