servo motor control ??

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
servo motor control ?? doc 09-04-2007
Posted by on September 4, 2007, 9:41 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Karl Townsend on September 4, 2007, 10:10 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Lloyd E. Sponenburgh on September 4, 2007, 10:23 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Tim Wescott on September 4, 2007, 11:20 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Lloyd E. Sponenburgh on September 4, 2007, 11:28 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
DC servo motor question October 3, 2008, 11:45 am
Manufacturer and Suppliers of AC Servo Drives, AC Servo Brushless Motors and PLC April 5, 2007, 7:33 am
Need help on DC motor control January 5, 2007, 9:42 pm
naive VFD motor control q December 5, 2006, 3:08 pm
DC motor speed control - anyone build one? October 12, 2008, 3:13 am
FA - 240V variac (for adjusting AC voltage or motor speed control) August 19, 2006, 2:36 am
WTD: Servo Table Feed July 23, 2006, 12:36 pm
X - Y servo positioning table November 13, 2006, 4:57 pm
SERVO vertical mill July 30, 2007, 12:09 pm
Used DC Servo motors for sale. March 27, 2006, 7:53 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap