shaper disassembly

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
shaper disassembly Grant Erwin 09-19-2006
Posted by Grant Erwin on September 19, 2006, 2:08 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by =?ISO-8859-1?Q?Nick_M=FCller?= on September 19, 2006, 2:56 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on September 19, 2006, 5:02 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Disassembly of dial calipers? November 5, 2006, 2:57 pm
Bridgeport Z axis shaft disassembly October 13, 2008, 8:28 pm
Disassembly of Large Butterfly-Type Water Valve May 15, 2006, 10:31 am
Sheldon 12" shaper October 19, 2006, 9:22 pm
Keyways on the shaper. My way. November 29, 2006, 10:52 am
SHAPER STILL WANTED March 10, 2007, 8:54 pm
SHAPER SHIPPED! March 19, 2007, 9:52 pm
Logan 7" Shaper May 8, 2006, 9:29 pm
Sheldon shaper March 23, 2006, 2:58 pm
Re: Shaper tool geometry July 26, 2006, 8:23 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap