shim stock for feeler gages

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
shim stock for feeler gages clutch 05-13-2007
Posted by on May 13, 2007, 2:42 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Snag on May 13, 2007, 3:14 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Roger Shoaf on May 13, 2007, 6:59 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by DanG on May 13, 2007, 8:19 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on May 13, 2007, 9:14 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Bought a few gages January 23, 2007, 9:09 pm
WTB a couple of length gages December 26, 2006, 8:05 pm
Bearing material for a dovetail shim December 5, 2006, 10:14 pm
Re: Curring stainless steel shim? March 13, 2006, 6:11 pm
Re: Curring stainless steel shim? March 13, 2006, 7:59 pm
Re: Curring stainless steel shim? March 13, 2006, 11:32 am
FA:6 Starrett Center Gages. Starts at $1 January 15, 2007, 2:12 pm
Seeking source for shim/spring washers February 11, 2008, 1:30 pm
Re: OT - use of a pneumatic vacuum pump (auto A/C use), converting R12 manifold gages to R134A? April 25, 2008, 2:27 am
Cheap Ear Muffs, QVC, and a stock tip October 27, 2006, 1:44 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap