small job shop business software

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
small job shop business software sigmatero 09-24-2007
Posted by on September 24, 2007, 1:37 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Tom Gardner on September 24, 2007, 4:33 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by F. George McDuffee on September 24, 2007, 12:58 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Shop layout software April 2, 2007, 2:11 am
shop layout "planning" software, freeware? May 15, 2006, 11:40 am
If you are looking for a place to Buy and sell your used stuff and promote your small business..here is the place to go July 19, 2008, 3:53 am
Re: Building a SMALL Shop March 14, 2006, 8:03 pm
Seeking CNC shop for small 2D job in brass January 26, 2007, 12:44 pm
Small job-shop contract with (actual) money July 17, 2007, 8:49 am
Own A Business? January 21, 2007, 10:23 am
how small a blower/vac for small bead blast cabinet -- micro cyclone? February 26, 2007, 1:19 am
business consultan November 11, 2006, 11:58 am
Get more customers for your business - wherever you are... January 8, 2007, 8:16 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap