spindle assembly

Home| Search | About

User Password

Lost Password?

General Metalworking - All aspects of working with metal.

Bookmark this page: YahooMyWeb

Yahoo!

Google

Windows Live

del.icio.us digg

digg

Netscape

Subject

Author

Date

07-13-2006

Posted by lmcgill on July 13, 2006, 3:33 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Posted by glyford@gmail.com on July 13, 2006, 4:23 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by glyford@gmail.com on July 13, 2006, 4:36 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Ron Bean on July 14, 2006, 1:27 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Paul D on July 14, 2006, 9:12 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Similar Threads	Posted
Camlock Spindle Assembly again	January 23, 2008, 6:21 pm
WTB Delta 17 drill press high speed spindle pulley and spindle.	May 28, 2007, 1:26 am
Re: WTB: shaper head assembly	August 28, 2006, 12:43 pm
Re: shaper head assembly	August 29, 2006, 8:27 pm
Sprocket Assembly Question	January 15, 2007, 5:35 pm
FA: Industrial Y-Z Assembly with Bosch Router	March 5, 2007, 9:17 pm
Pictures (not mine of course) -- Tod Engine Assembly done	July 3, 2008, 8:02 am
Assembly advice--pins vs set screws vs epoxy...	July 9, 2007, 1:24 pm
Excellent Space Shuttle Assembly Photos	November 17, 2007, 9:16 pm
fa - nice new right angle drive gear assembly	December 30, 2007, 1:13 am

XML Sitemap