steel cutting cold saw?

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
steel cutting cold saw? Grant Erwin 03-08-2007
Posted by Grant Erwin on March 9, 2007, 10:24 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by yourname on March 9, 2007, 3:57 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Ries on March 9, 2007, 12:19 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Hot or cold cutting? Hack a cutoff saw to cold saw? August 8, 2007, 3:20 pm
Re: Saw Blade Teeth - Cold Saw Cutting Thin Wall Tubing May 16, 2006, 7:35 pm
Re: Saw Blade Teeth - Cold Saw Cutting Thin Wall Tubing May 16, 2006, 7:41 pm
Tool recommendation for turning cold rolled steel January 1, 2008, 3:22 pm
Cutting steel plate September 3, 2008, 12:20 am
cutting steel plate with circular saw? January 9, 2007, 10:01 am
Cutting 10 guage plate steel with a Skill saw. March 30, 2007, 1:00 am
Fast cutting drill bit for mild steel March 15, 2006, 8:23 pm
cutting a ~ 1 inch think steel pipe - use a hacksaw? March 20, 2006, 5:31 pm
Garden Tractor Demolition / Cutting up steel - How and how fast can I do it? September 6, 2007, 4:32 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap