tapping tapered pipe thread

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
tapping tapered pipe thread William Wixon 10-06-2006
Posted by William Wixon on October 6, 2006, 8:07 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Lloyd E. Sponenburgh on October 6, 2006, 8:45 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Ignoramus7272 on October 6, 2006, 9:25 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Grant Erwin on October 6, 2006, 10:04 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Tom Wait on October 6, 2006, 10:44 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Tapered Pipe Threads: How to get Tight Joints in a Particualr Direction? September 30, 2006, 12:34 pm
Re: Tapping aluminum (or tapping on wood?) December 15, 2007, 9:13 pm
Re: Tapping aluminum (or tapping on wood?) December 15, 2007, 10:35 pm
Re: Tapping aluminum (or tapping on wood?) December 17, 2007, 1:17 am
Inverted tapered Endmills? July 17, 2007, 11:21 am
Slightly OT,Tapered Threading September 4, 2007, 12:38 am
tapered roller bearing preload September 17, 2007, 10:34 pm
Re: can someone explain to me about tapered gauge pins? September 26, 2007, 3:18 am
Re: can someone explain to me about tapered gauge pins? September 26, 2007, 3:25 am
Tapered bearing race install December 29, 2007, 8:21 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap