the most inexpensive lead screw needed

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
the most inexpensive lead screw needed dmehling 07-29-2007
Posted by F. George McDuffee on July 29, 2007, 8:33 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gunner Asch on July 30, 2007, 3:02 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Anthony on July 30, 2007, 10:41 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Metric lead screw and nut December 27, 2006, 2:02 pm
Measuring torque on lead screw January 12, 2008, 3:11 pm
Lead screw load/size question January 19, 2007, 7:58 pm
Extending the lead-screw of my small vertical mill February 6, 2007, 2:14 pm
Source for really small screw extractors needed October 16, 2008, 7:49 pm
Suggestions needed on how to create thread interference on 6-32 screw November 29, 2007, 4:01 pm
Cutting metric threads on non metric lead screw April 22, 2007, 5:44 pm
Inexpensive but worthwhile wirefeed? June 23, 2008, 12:46 am
inexpensive bandsaw blade welder? April 12, 2007, 5:15 pm
If anybody's looking for inexpensive delrin pieces October 14, 2007, 6:52 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap