why is there a morse taper in the back end of my lathe spindle

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
why is there a morse taper in the back end of my lathe spindle Randy 11-10-2006
Posted by Dave Lyon on November 10, 2006, 2:37 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Harold and Susan Vordos on November 10, 2006, 8:06 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Dave Lyon on November 13, 2006, 10:00 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Harold and Susan Vordos on November 13, 2006, 2:31 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Dave Lyon on November 13, 2006, 4:16 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Lathe miling/spindle taper November 20, 2006, 1:00 pm
Rockwell-Delta 10 inch lathe spindle taper? May 4, 2006, 8:55 am
Morse taper cutting any advice??? February 5, 2008, 7:26 pm
Cleaning morse taper in headstock December 5, 2008, 10:29 pm
FOLLOWUP on Morse 5 taper cleanup December 10, 2008, 5:20 pm
What's the difference between Morse Taper roughing and finishing reamers? June 6, 2007, 9:02 am
Making taper attachment for lathe - what range of taper? August 28, 2006, 8:33 am
SPINDLE TAPER ADAPTER April 13, 2006, 11:55 am
10EE Spindle taper December 29, 2008, 8:22 am
Taper on grinder spindle, how to measure January 23, 2008, 8:52 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap