Aerosol cutting fluid - anyone using it?

Home| Search | About
User Password
Register Now! Lost Password?

Model Engineering in UK - Model engineering, metal crafts in UK 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Aerosol cutting fluid - anyone using it? Paul Bernard 07-01-2008
Posted by ravensworth2674 on July 2, 2008, 7:37 am
Please log in for more thread options
> On Wed, 2 Jul 2008 00:05:37 -0700 (PDT), ravensworth2674
>
> >I use 'lard oil' and buy it in 5 litre containers.
>
> Tried it for frying yer chips? <G>
>
> Regards,
> Tony

Works fine, they are no longer blue!
Er-uhm?
The wooden chips were not much good, they bunged up the planer with
the oil.
More Er-Uhm?

Works OK on Fry's Metals

Even more Er-uhm

Recall Dr CEM Joad in Brains Trust? It all depends on what you mean
by*********

And his mate Prof Jacob Bronowski-- Thank you for humouring me

Even more of the same

Norm



Posted by Neil Ellwood on July 2, 2008, 12:25 pm
Please log in for more thread options
 On Wed, 02 Jul 2008 04:37:27 -0700, ravensworth2674 wrote:

> Recall Dr CEM Joad in Brains Trust? It all depends on what you mean
> by*********
>
> And his mate Prof Jacob Bronowski-- Thank you for humouring me
>
> Even more of the same
>
> Norm

sshhh........ you're showing your age, you should have has anyone heard
of.....

--
Neil
reverse ra and delete l
Linux user 335851

Posted by newshound on July 4, 2008, 5:50 pm
Please log in for more thread options

>> Recall Dr CEM Joad in Brains Trust? It all depends on what you mean
>> by*********
>>
>> And his mate Prof Jacob Bronowski-- Thank you for humouring me
>>
>> Even more of the same
>>
>> Norm
>
> sshhh........ you're showing your age, you should have has anyone heard
> of.....
>
I was accused of waving my arms like a mad scientist the other day. I
admitted to doing a Magnus Pyke, which got the response: "Who?"



Posted by ravensworth2674 on July 5, 2008, 2:33 am
Please log in for more thread options
> >> Recall Dr CEM Joad in Brains Trust? It all depends on what you mean
> >> by*********
>
> >> And his mate Prof Jacob Bronowski-- Thank you for humouring me
>
> >> Even more of the same
>
> >> Norm
>
> > sshhh........ you're showing your age, you should have has anyone heard
> > of.....
>
> I was accused of waving my arms like a mad scientist the other day. I
> admitted to doing a Magnus Pyke, which got the response: "Who?"

I confess to doing a very good- well sort of, Benny Hill in the
Italian Job.
1 I have 'done it'
2. I live in a lunatic asylum( well part of it is still one)
3. I know several Matrons- and I am not giving introductions. They are
mine------alll mine!

Posted by Tony Jeffree on July 2, 2008, 5:45 am
Please log in for more thread options
On Tue, 1 Jul 2008 20:27:56 +0100, "Paul Bernard"

>I purchased 3 x 400ml aerosol cans of 'oily brown gunge' from Scewfix a
>couple of years ago at quite a reasonable price (about £3.60) but I now find
>that they no longer stock it.
>Farnell have 2 or 3 available at far greater cost or a carton of a dozen is
>available at many distibutors.
>I found it to be very good to in getting the stuff to the right place
>without getting gallons of smelly stuff everywhere.
>Anyone know of a source at a reasonable price and without an £8.95 delivery
>charge?
>
>Thanks, Paul
>
I found some on one of the stalls at the Harrogate show a couple of
years back. Seems to work OK. Can't remember which stand it was
though.

Regards,
Tony

Similar ThreadsPosted
Re: Laser Cutting January 7, 2008, 10:02 pm
Gear Cutting February 28, 2008, 4:16 am
Thread cutting August 15, 2006, 9:48 am
Cutting Spur Gears January 12, 2008, 2:23 pm
Attaching a cutting wheel.... May 2, 2008, 5:11 pm
Anyone know where I can buy free cutting mild steel? April 6, 2008, 4:42 pm
Cutting Meccano Spec gears May 3, 2008, 10:12 am
Cutting narrow deep rectangular hole..... May 21, 2008, 2:50 pm
sheet metal shears and cutting 3mm aluminium June 11, 2008, 5:40 am
Problem Cutting 12 tooth Spur Gear August 3, 2008, 1:54 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap