Bearing supplier help

Home| Search | About
User Password
Register Now! Lost Password?

Model Engineering in UK - Model engineering, metal crafts in UK 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Bearing supplier help Steve 09-21-2006
Posted by John Stevenson on September 21, 2006, 6:20 pm
Please log in for more thread options
 On Thu, 21 Sep 2006 23:10:07 +0100, Kevin Steele

>
>>>
>>
>>
>>Arceuro £4.50
>>
>>http://www.arceurotrade.co.uk/en-gb/dept_147.html
>>
>>Dave H
>
>
>I've used Arc for bearings at home and work for a while now, and
>always had excelent service and great prices.
>
>Regards
>Kevin

One thing to note with Arc's pricing is that it always contains the
VAT.
I dare say most of the other quotes are plus VAT.
.
--
Regards,

John Stevenson
Nottingham, England.

Visit the new Model Engineering adverts page at:-
http://www.homeworkshop.org.uk/

Posted by Steve on September 21, 2006, 6:47 pm
Please log in for more thread options
John Stevenson wrote:
> On Thu, 21 Sep 2006 23:10:07 +0100, Kevin Steele
>
> >
> >>>
> >>
> >>
> >>Arceuro =A34.50
> >>
> >>http://www.arceurotrade.co.uk/en-gb/dept_147.html
> >>
> >>Dave H
> >
> >
> >I've used Arc for bearings at home and work for a while now, and
> >always had excelent service and great prices.
> >
> >Regards
> >Kevin
>
> One thing to note with Arc's pricing is that it always contains the
> VAT.
> I dare say most of the other quotes are plus VAT.
> .
> --
> Regards,
>
> John Stevenson
> Nottingham, England.
>
> Visit the new Model Engineering adverts page at:-
> http://www.homeworkshop.org.uk/

I actually looked in the printed ArcEuro catalogue I have this morning
- and didn't find the bearing, but that must be out of date or
incomplete (I didn't think to look at their stuff on the web). As a
model engineering supplier who attend the exhibitions and also do
bearings at a really good price they are well worth having on your
favourites list.

Thanks
Steve


Posted by Steve on September 21, 2006, 7:07 pm
Please log in for more thread options

John Stevenson wrote:
> On Thu, 21 Sep 2006 23:10:07 +0100, Kevin Steele
>
> >
> >>>
> >>
> >>
> >>Arceuro =A34.50
> >>
> >>http://www.arceurotrade.co.uk/en-gb/dept_147.html
> >>
> >>Dave H
> >
> >
> >I've used Arc for bearings at home and work for a while now, and
> >always had excelent service and great prices.
> >
> >Regards
> >Kevin
>
> One thing to note with Arc's pricing is that it always contains the
> VAT.
> I dare say most of the other quotes are plus VAT.
> .
> --
> Regards,
>
> John Stevenson
> Nottingham, England.
>
> Visit the new Model Engineering adverts page at:-
> http://www.homeworkshop.org.uk/

Having ordered the bearing from them (and a 2MT blank arbor 1.5inch
diameter) I can add that their postage is also more than reasonable.
Not far short of marvellous, and a nice website too.

Steve R


Posted by Prepair Ltd on September 21, 2006, 10:54 am
Please log in for more thread options

>I thought £30 for a 5/8" ID ball race was expensive until I read the
>earlier thread - but it seems a lot to me for a tiddler (its an entire
>weeks beer money !).
>
>Its a 5/8" ID, 1 9/16" OD ball race in the gearbox of my Meddings. Its
>marked "KSM RLS5 Japan". Anyone have any ideas on where to get an
>equivalent (especially locally near Chester) ? I've looked on the web
>and found too much !
>
>Ta, Steve R

£34.64 list less 75% at our local place, plus VAT.

Peter
--
Peter A Forbes
Prepair Ltd, Luton, UK
prepair@easynet.co.uk
http://www.prepair.co.uk

Posted by Wayne Weedon on September 21, 2006, 12:06 pm
Please log in for more thread options
Steve wrote:
> I thought £30 for a 5/8" ID ball race was expensive until I read the
> earlier thread - but it seems a lot to me for a tiddler (its an entire
> weeks beer money !).
>
> Its a 5/8" ID, 1 9/16" OD ball race in the gearbox of my Meddings. Its
> marked "KSM RLS5 Japan". Anyone have any ideas on where to get an
> equivalent (especially locally near Chester) ? I've looked on the web
> and found too much !


Strange I know but bearings are normally discounted 70-80% to trade.
Seems your stockist is trying to get list price ;) Often it's about
the way you approach them!

Wayne...

Similar ThreadsPosted
Supplier January 29, 2008, 6:24 am
Metric sized Aluminium supplier February 7, 2008, 7:03 am
Bearing discounts? September 21, 2006, 3:54 am
Bantam Bearing Adjustment February 9, 2008, 7:03 am
Myford ML7 with bearing problems! April 11, 2008, 6:18 pm
Steel/bronze bearing April 28, 2008, 11:31 am
ML7 thrust bearing sleeve query June 28, 2008, 1:08 pm
How sealed is a sealed bearing July 15, 2008, 8:17 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap