|
Posted by Charles Ping on October 4, 2006, 2:21 am
Please log in for more thread options
>
>Trevor Jones wrote:
>> mark wrote:
>> > Is the threaded back plate and chuck for a hardinge hct chucker the
>> > same as a boxford.
>> >
>> >
>> > All the best...mark
>> >
>> Unlikely.
>>
>> Are you looking to fit it to a Hardinge or a Boxford?
>>
>> Cheers
>> Trevor Jones
>
>I'm looking for a good four jaw for my hardinge ..hopefully cheap off
>ebay.
>
>
>looking at my three jaw ...i dont have the boxford to compare, but it
>looks like it ...I dont know .thread base of the hardinge chuck is 55mm
>
>and pitch of thread is 10 threads per inch
>
>all the best.mark
I have an apparently unused Hardinge 4 jaw - missing one screw but
that shouldn't be hard to remake.
Email me if you're interested.
Charles
http://www.homeworkshop.org.uk
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> same as a boxford.
>
>
> All the best...mark
>