|
Posted by david.sanderson@bem.fki-et.com on August 16, 2006, 9:30 am
Please log in for more thread options
Robin wrote:
> Robin wrote:
> > The nylon gear on my Fellowes crosscut shredder has lost a couple of
> > teeth so I'm down to the tinfoil hat when it comes to protecting my
> > identity!! They don't stock spares but is there any supplier who might?
> > Don't have the exact measurements as haven't fully dismantled it yet,
> > but it's roughly 50mm across with about 25 teeth (before they
> > broke!!)...
>
> OK, some more info. Have counted the teeth and I guessed right - 25
> teeth. I guess that would make it a Module 2 spur gear with 25 teeth.
> It sits on a hex shaft ~12mm across (difficult to measure at the moment)
HPC gears comes to mind. http://www.hpcgears.com - usual disclamier,
however Ive never actually bought anything from them.
I probably have one in my selection of junk, Ive been salvaging parts
from printers and photocopiers, mostly the nice straight shafts, but
also the gears and steppers, but Im going away so wont be able to look
until sunday.
What width is it?
Dave
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> teeth so I'm down to the tinfoil hat when it comes to protecting my
> identity!! They don't stock spares but is there any supplier who might?
> Don't have the exact measurements as haven't fully dismantled it yet,
> but it's roughly 50mm across with about 25 teeth (before they
> broke!!)...