|
Posted by TT_Man on April 26, 2008, 12:21 pm
Please log in for more thread options
> Just been and removed my pin, its tapered and is 5.00mm at the narrow end
> and 5.50mm at the other. A sharp tap and a good pin punch removed it.
> If you want copies of Machine assembly drawings I can email them to you.
>
Thanks for all the help guys. Stripped the lot down and cleaned it all .Put
it all back together and very nice it is too. One of the lead screw blocks
is a bit worn, but it will do for now.
Yes, the assembly drawings would be most welcome. my email address is kraken
dot sankey at ntlworld dot com
Does anyone have any suggestions for half decent tools? 99% of my work will
be aluminium tube/ bar, max dia 20mm, mostly 10/12mm.
Going back to my old days ( when I was en electronics engineer working on
Boehringer CNC lathes) they used ceramic inserts . It that an option I have
?
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> and 5.50mm at the other. A sharp tap and a good pin punch removed it.
> If you want copies of Machine assembly drawings I can email them to you.
>