|
Posted by Richard Edwards on February 24, 2008, 5:25 am
Please log in for more thread options On Sun, 24 Feb 2008 09:42:03 +0000, Richard <sharkface-pilot at
toucansurf dot com> wrote:
>On Sat, 23 Feb 2008 17:43:14 +0000, Richard Edwards
>
>>I am looking for a 10mm Clarkson type S collet. If anyone has one
>>spare I can swap with a 3/8th type S (Well it appears to be a 3/8th
>>but its very tight up the hole) or a 10mm type C in perfect condition.
>
>ebay item 360026807529
Thanks Richard, I have seen that and the 12mm, cost for the two would
be £22. If no response to this post I may buy a new 6-10-12-16 metric
set at £32 and flog the 6 and 16 (which I have). No carriage on the
£32 as I am local.
Hope that you are happy with the chasers ;-)
--
Richard
Email address is valid but remove burrs before sending!
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>spare I can swap with a 3/8th type S (Well it appears to be a 3/8th
>but its very tight up the hole) or a 10mm type C in perfect condition.