|
Posted by Mark Rand on January 9, 2008, 2:17 pm
Please log in for more thread options
>>
>> The suggestion of using studding would be good, except for the fact that
>> you
>> would need either BSW spanners or to turn it down and put a metric thread
>> on
>> the end.
>
>Wots wrong with a shifter? -or am I showing my ignorance :-)
>
>Archie
>
Only major issue is that it's a pain to have to adjust one at head height,
against a mill head with little knuckle room, every time you use it.
Mark Rand
RTFM
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>slitting saw arbour I found that most are 3/8th or 1/2 BSW. My problem is I
>only have a metric lathe so can't make a new draw bar with an imperial
>thread. Is there someone who sells these or a soource that has M12 arbours
>anywhere.
>
>Or is there a configuration with the change gears where I can cut an
>imperial thread on a metric lathe.
>