Electronic Hobbing Article

Model Engineering in UK - Model engineering, metal crafts in UK 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Electronic Hobbing Article Charles Ping 04-22-2008
Posted by John Stevenson on April 22, 2008, 10:33 am
Please log in for more thread options
wrote:

>Charles Ping wrote:
>> There was an article or maybe two (and a later correction) starting in
>> MEW issue 108 on the construction of an electronic hobber - the basis
>> of the one that John Stevenson runs.
>
>I have all the info here with a view to putting a kit together, but there did
>not seem to be enough demand. If there is then I'll brush off the dust and
>have a go.
>John's original prototype is on the shelf here ;)

Doing well here, found out where a mill drill went and now a gear
hobber.

Soon be able to see a floor at this rate.

--
Regards,

John Stevenson
Nottingham, England.

Visit the new Model Engineering adverts page at:-
http://www.homeworkshop.org.uk/

Posted by Cliff Ray on April 22, 2008, 10:48 am
Please log in for more thread options
John Stevenson wrote:
> wrote:
>
>> Charles Ping wrote:
>>> There was an article or maybe two (and a later correction) starting in
>>> MEW issue 108 on the construction of an electronic hobber - the basis
>>> of the one that John Stevenson runs.
>> I have all the info here with a view to putting a kit together, but there did
>> not seem to be enough demand. If there is then I'll brush off the dust and
>> have a go.
>> John's original prototype is on the shelf here ;)
>
> Doing well here, found out where a mill drill went and now a gear
> hobber.
>
> Soon be able to see a floor at this rate.
>
> --
> Regards,
>
> John Stevenson
> Nottingham, England.
>
Unless you find you find that is missing as well.

Posted by Tony Jeffree on April 22, 2008, 12:31 pm
Please log in for more thread options
On Tue, 22 Apr 2008 15:48:24 +0100, Cliff Ray

>> Soon be able to see a floor at this rate.
>>
>> --
>> Regards,
>>
>> John Stevenson
>> Nottingham, England.
>>
>Unless you find you find that is missing as well.

Well, whenever I have been to his workshop I have never seen one...

Regards,
Tony

Posted by dave sanderson on April 22, 2008, 12:58 pm
Please log in for more thread options
> On Tue, 22 Apr 2008 15:48:24 +0100, Cliff Ray
>
> >> Soon be able to see a floor at this rate.
>
> >> --
> >> Regards,
>
> >> John Stevenson
> >> Nottingham, England.
>
> >Unless you find you find that is missing as well.
>
> Well, whenever I have been to his workshop I have never seen one...
>
> Regards,
> Tony

theres quite a lot of it on pallets outside, IIRC there was a slight
over order issue :)

Dave

Similar ThreadsPosted
MEW Article March 1, 2008, 12:01 pm
What is the grade of aluminium sheet for electronic enclosures and panels? June 10, 2008, 9:36 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap