|
Posted by Knut Pedersen on August 12, 2006, 5:40 am
Please log in for more thread options
Thank you so far More details:
Thickness of spring 5 mm. Outside diam. 1 cm less than innside hose.
Generator rated 12 volt 9 amp continious
Knut
>I think so as it would not unless very thick transmit much power.
>
>Martin P
>
>>
>>> From what I have seen on the rally field with these is that the drive is
>>> through the hose so the clips should be tight enough to grip.
>>>
>>> Martin P
>>>
>>> >I have an old 12 volt generator driven by a JAP engine. Connection
>> between
>>> > motor and generator is like two cups outside diametre 55 mm, distance
>>> > between
>>> > them 8 mm, connected with a spring innside. Outside it was a hose or
>> sheet
>>> > of
>>> > canvas covered with rubber fastend with hose clamps.
>>> > Seen from the generator JAP is running anticlock spring is righthand.
>> When
>>> > I
>>> > turn the generator against motor direction ends of the spring comes to
>>> > a
>>> > stop.
>>> > How firm should the hose clamps be. I guess I should turn the generator
>>> > against motor direction before fastening hose.
>>> > Hope someone are able to help
>>> > Knut
>>> > Bergen Norway
>>>
>>>
>>
>> So is the purpose of the spring simply to stop the hose collapsing?
>>
>> Bob
>>
>>
>
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>
>Martin P
>