|
Posted by DaveC on July 18, 2008, 6:12 am
Please log in for more thread options
Ivan Law published a set of revised gear cutter buttons in Model Engineer
June 1990. In the article he mentioned he omitted the cutting of Helical
Gears from his book 'Gears and Gear Cutting'. There is hint in the article
of the possibility of further articles on the subject of helical gears in
ME.
Does anyone have an references to further articles on Helical Gear cutting?
Thank you in advance.
|
|
Posted by Michael Gray on July 18, 2008, 10:55 am
Please log in for more thread options
On Fri, 18 Jul 2008 11:12:29 +0100, DaveC wrote:
> Ivan Law published a set of revised gear cutter buttons in Model Engineer
> June 1990. In the article he mentioned he omitted the cutting of Helical
> Gears from his book 'Gears and Gear Cutting'. There is hint in the article
> of the possibility of further articles on the subject of helical gears in
> ME.
> Does anyone have an references to further articles on Helical Gear cutting?
>
> Thank you in advance.
Dave, these are the only two references I can find in the ME Index:
Vol.174, No.3991, p.468, Gears from Scratch 2,
Jock Smith,
Describes spur, helical and spiral gear manufacture.
Making a spur gear, addendum correction, helical gears, spiral gears,
problems, picture on page 455
Vol.196, No.4269, p.339, Cutting Spiral Gears in the Lathe",
Rex Swensen,
Explains his methods. Hobbing process, leadscrew ratios,
computer, helical gear equations, possible gear solutions
8:16 teeth, spiral design for cam shaft drive
HTH,
Mike Gray in Beautiful BC, Home of the 2010 Olympics
|
|
Posted by on July 20, 2008, 5:50 am
Please log in for more thread options > Ivan Law published a set of revised gear cutter buttons in Model Engineer
> June 1990. In the article he mentioned he omitted the cutting of Helical
> Gears from his book 'Gears and Gear Cutting'. =A0There is hint in the art=
icle
> of =A0the possibility of further articles on the subject of helical gears=
in
> ME.
> Does anyone have an references to further articles on Helical Gear cuttin=
g?
>
> Thank you in advance.
There is quite a lot of data in Machinery's handbook (at least in my
13th edition). I think you have to let us know a little more about
what you want to do and what equipment you have to do it on. I have
done some of these on home workshop equipment, but they are not easy
and you wqill make scrap to begin with!.
If I can help further, please contact me
Peter
|
|
Posted by John S on July 20, 2008, 6:12 am
Please log in for more thread options > Ivan Law published a set of revised gear cutter buttons in Model Engineer
> June 1990. In the article he mentioned he omitted the cutting of Helical
> Gears from his book 'Gears and Gear Cutting'. There is hint in the article
> of the possibility of further articles on the subject of helical gears in
> ME.
> Does anyone have an references to further articles on Helical Gear cutting?
>
> Thank you in advance.
You need the Brown and Sharp book Practical Treatise on Gearing.
http://www.archive.org/details/treatisegear00browrich
This is also a nice one.
http://www.archive.org/details/spiralgearing00flanrich
and this
http://www.archive.org/details/spiralwormgearin00oberrich
--
Regards,
John Stevenson
Nottingham, England.
|
| Similar Threads | Posted | | Making Gear Cutters (Ivan Laws Book) | June 15, 2008, 6:30 am |
| Cutting Spur Gears | January 12, 2008, 2:23 pm |
| Viceroy surfacing gears problem | January 12, 2008, 12:53 pm |
| Buying new gears for Fellowes shredder | August 16, 2006, 8:31 am |
| 16DP lathe gears needed | August 22, 2006, 7:30 pm |
| Cutting Meccano Spec gears | May 3, 2008, 10:12 am |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> June 1990. In the article he mentioned he omitted the cutting of Helical
> Gears from his book 'Gears and Gear Cutting'. There is hint in the article
> of the possibility of further articles on the subject of helical gears in
> ME.
> Does anyone have an references to further articles on Helical Gear cutting?
>
> Thank you in advance.