|
Posted by John S on August 4, 2008, 3:33 am
Please log in for more thread options
> John S wrote:
> >> Some time back, I bought a Jaguar Cub inverter. Model CUB3A.
>
> >> I have that connected up to drive a three phase motor on my lathe. All
> >> works just fine.
>
> >> Now I want to make an external control box for it but I can't seem to
> >> work out some of the details.
>
> >> FWD/REV and speed are simple enough but I am not sure how to get the
> >> start/stop connected. There is a stop input available on termnal X2 but
> >> as soon as that is released, the motor will start again. I would like to
> >> add an emergency stop function that latches on, like an NVR switch.
>
> >> Has anyone got, or can point me to, wiring details for an external box
> >> for this inverter?
>
> >> Thanks
>
> >> Pete Harrison
>
> > Peter,
> > I have the wiring and setup for most Cub drives for 3 wire.
> > Do you have a link to the manual as I can't find a CUB3A listed
>
> > Look at this page and let me know which one it is and I can post
> > wiring and setup.
>
> >http://www.imopc.com/document_library.asp?cat=27&page=2
>
> > John S.
>
> It is the first one on the list:
>
> http://www.imopc.com/download/874/jaguar-drive-cub-mini-manual.html
>
> This manual is identical to the one that came with the inverter.
>
> Pete Harrison
OK will dig the sheets out later, have to go deliver a machine today
but it's not a problem.
John S.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>>
>> I have that connected up to drive a three phase motor on my lathe. All
>> works just fine.
>>
>> Now I want to make an external control box for it but I can't seem to
>> work out some of the details.
>>
>> FWD/REV and speed are simple enough but I am not sure how to get the
>> start/stop connected. There is a stop input available on termnal X2 but
>> as soon as that is released, the motor will start again. I would like to
>> add an emergency stop function that latches on, like an NVR switch.
>>
>> Has anyone got, or can point me to, wiring details for an external box
>> for this inverter?
>>
>> Thanks
>>
>> Pete Harrison