|
Posted by Martin Whybrow on September 11, 2008, 2:50 pm
Please log in for more thread options
I'm trying to locate a source for 10-32 UNF x 1/4" dog point grubscrews with
little success, the only supplier listing it is TR Fasteners and they show
it as non-preferred which probably means they will manufacture it as a
special with the associated MOQ probably in the 1000s. I can find cup points
but this is to replace some screws in an application where the dog point is
essential.
Anyone know of a supplier that may have them? I only need 2 but would be
willing to buy a small box if that's what's available, slightly longer would
probably be OK.
Martin
--
martin<dot here>whybrow<at here>ntlworld<dot here>com
|
|
Posted by Mark Rand on September 11, 2008, 4:05 pm
Please log in for more thread options
On Thu, 11 Sep 2008 19:50:53 +0100, "Martin Whybrow"
>I'm trying to locate a source for 10-32 UNF x 1/4" dog point grubscrews with
>little success, the only supplier listing it is TR Fasteners and they show
>it as non-preferred which probably means they will manufacture it as a
>special with the associated MOQ probably in the 1000s. I can find cup points
>but this is to replace some screws in an application where the dog point is
>essential.
>Anyone know of a supplier that may have them? I only need 2 but would be
>willing to buy a small box if that's what's available, slightly longer would
>probably be OK.
>Martin
If you come across any 3/16 BSF they'll fit, albeit they'll be a free fit. May
not help much, but doubles the chances.
Mark Rand
RTFM
|
|
Posted by Tim L on September 11, 2008, 4:20 pm
Please log in for more thread options
On Thu, 11 Sep 2008 21:05:41 +0100, Mark Rand
>On Thu, 11 Sep 2008 19:50:53 +0100, "Martin Whybrow"
>
>>I'm trying to locate a source for 10-32 UNF x 1/4" dog point grubscrews with
>>little success, the only supplier listing it is TR Fasteners and they show
>>it as non-preferred which probably means they will manufacture it as a
>>special with the associated MOQ probably in the 1000s. I can find cup points
>>but this is to replace some screws in an application where the dog point is
>>essential.
>>Anyone know of a supplier that may have them? I only need 2 but would be
>>willing to buy a small box if that's what's available, slightly longer would
>>probably be OK.
>>Martin
>
>
>If you come across any 3/16 BSF they'll fit, albeit they'll be a free fit. May
>not help much, but doubles the chances.
.............and if 3/16" BSF will sort of fit, 2BA won't be far
behind. M5 isn't too far off either<G>
Tim
|
|
Posted by Tony Jeffree on September 11, 2008, 4:26 pm
Please log in for more thread options
On Thu, 11 Sep 2008 19:50:53 +0100, "Martin Whybrow"
>I'm trying to locate a source for 10-32 UNF x 1/4" dog point grubscrews with
>little success, the only supplier listing it is TR Fasteners and they show
>it as non-preferred which probably means they will manufacture it as a
>special with the associated MOQ probably in the 1000s. I can find cup points
>but this is to replace some screws in an application where the dog point is
>essential.
>Anyone know of a supplier that may have them? I only need 2 but would be
>willing to buy a small box if that's what's available, slightly longer would
>probably be OK.
>Martin
Emkay screw supplies do a good range of UNF including the ones you
want:
www.emkaysupplies.co.uk
Regards,
Tony
|
|
Posted by Tony Jeffree on September 11, 2008, 5:07 pm
Please log in for more thread options
wrote:
>On Thu, 11 Sep 2008 19:50:53 +0100, "Martin Whybrow"
>
>>I'm trying to locate a source for 10-32 UNF x 1/4" dog point grubscrews with
>>little success, the only supplier listing it is TR Fasteners and they show
>>it as non-preferred which probably means they will manufacture it as a
>>special with the associated MOQ probably in the 1000s. I can find cup points
>>but this is to replace some screws in an application where the dog point is
>>essential.
>>Anyone know of a supplier that may have them? I only need 2 but would be
>>willing to buy a small box if that's what's available, slightly longer would
>>probably be OK.
>>Martin
>
>Emkay screw supplies do a good range of UNF including the ones you
>want:
>
>www.emkaysupplies.co.uk
Hmmm...on reflection, the probably stock cup rather than dog point;
however, in the past they have been helpful in finding stuff that they
don't keep as normal stock items, so probably worth getting on the dog
& bone to them.
Regards,
Tony
|
| Similar Threads | Posted | | grub screw | August 19, 2008, 5:03 am |
| Toolpost screws | October 27, 2008, 6:49 am |
| Instrument head screws ? | January 7, 2008, 6:09 am |
| Re: 10 BA (or 1.7mm) Countersunk Steel Screws? | January 15, 2008, 8:48 am |
| Re: 10 BA (or 1.7mm) Countersunk Steel Screws? | January 15, 2008, 8:49 am |
| Slittling very small screws | May 15, 2008, 4:34 pm |
| Source of 2mm and 2.5mm socket head screws | April 25, 2008, 4:01 pm |
| 9mm Square Head toolpost screws | October 27, 2008, 5:45 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>little success, the only supplier listing it is TR Fasteners and they show
>it as non-preferred which probably means they will manufacture it as a
>special with the associated MOQ probably in the 1000s. I can find cup points
>but this is to replace some screws in an application where the dog point is
>essential.
>Anyone know of a supplier that may have them? I only need 2 but would be
>willing to buy a small box if that's what's available, slightly longer would
>probably be OK.
>Martin